古诗大全300首小学,一杆大枪草一家三娘的故事,男人的坤坤升到女人的坤坤,国产处破苞无码精品网站下载

LPG系類高速離心噴霧干燥機

    空氣經過過濾和加熱，進入干燥器頂部空氣分配器，熱空氣呈螺旋狀均勻地進入干燥室。料液經塔體頂部的高速離心霧化器，（旋轉）噴霧成極細微的霧狀液珠，與熱空氣并流接觸，在極短的時間內可干燥為成品。成品連續地由干燥塔底部和旋風分離器中輸出，廢氣由風機排空。
After filtering and heating, the air enters into the air distributor at the top of the drier. The hot air enters into the drying chamber in the spiral from and uniformly.By passing through the high-speed centrifugal spray at the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Through the very short time of contacting the heat air,the materials can be dried into the finished products. The finished products will separator. The waste gas will be discharged from blower.

----------------------------------------------------------------------------------------------------------------
特點   Featrures
◎ 干燥速度快，料液經霧化后，表面積大大增加，在熱風氣流中，瞬間就可蒸發95%-98%的水份，完成干燥時間僅需數秒鐘，特別適用于熱敏性物料的干燥。
◎ 產品具有良好的均勻度、流動性和溶解性、產品純度高、質量好。
◎ 生產過程簡化，操作控制方便。對于濕含量40-60%(特殊物料可達90%)的液體能一次干燥成粉粒產品，干燥后不需粉碎和篩選，減少生產工序 ，提高產品純度 。對產品粒徑、松密度、水份，在一定范圍內可通過改變操作條件進行調整，控制和管理都很方便。
 
◎   At a high speed of drying, after the spraying of the liquid material , the surface area of the material will be increased greatly. In the hot-air flow, 95%-98%of water can be evaporated at a moment. The time of completing the drying needs only several seconds.
◎  This id especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, mobility, dissolving capacity. And the final products are high in their purity and good in their quality.
◎  The production procedures are simple and the operation and control are easy. The liquid with the moisture contents 40-60%(for special materials, The contents may reach 90%).can e dried into the powder or particle products once a time. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.
----------------------------------------------------------------------------------------------------------------
技術參數   Technical parameters
項目Item/型號Type/參數Parameter  LPG-5  LPG-25  LPG-50  LPG-100  LPG-150  LPG-200  LPG-500  LPG-800  LPG-1000  LPG-2000
入口溫度Inlet temperature(℃)  140-350自控automatically controlled
出口溫度Outlet temperature(℃)  80-90
噴霧形式Way of atomizing  高速離心霧化器(機械傳動或無級變頻調速可供選擇)High Speed centrifugal atomizer
水份蒸發量water evaporation capacity(kg/h)  5  25  50  100  150  200  500  800  1000  200
霧化器轉速Revolution of atomizer  25000  22000  21500  18000  16000  12000-13000  11000-12000
霧化盤直徑Diameter of atomizing tray(mm)  60  120  150  180-210  根據工藝要求確定Decided in accordance with the requirement of process
電加熱**功率Max Electric heating power(kw)  8  31.5  120  81  99  　
干粉回收率Dried powder restoring rate(％)  ≥95
占地長度Length of convered area(m)  1.6  4  4.5  5.2  7  7.5  12.5  13.5  14.5  
根據工藝流程，廠地條件及用戶要求 確定Decided in accordance the flow chart, condition of filed and requirements of customers.　
占地寬度Width of convered area(m)  1.1  2.7  2.8  3.5  5.5  6  8  12  14
塔體高度Height of tower body(m)  1.75  4.5  5.5  6.7  7.2  8  10  11  15
噴頭吊裝高度Hoisting height of nozzle(m)  __  2.5  2.5  3.2  3.2  3.2  3.2  3.2  3.2
注：水份蒸發量與物料的特性，含固量及熱風進出口溫度有關。用戶可根據當地能源情況選定加熱方式，根據物料特性選擇收塵，除塵方式。
Notes: The evaporated amount of moisture is contected with characteristics of raw material t, solid content and temperature of hot air at inlet and outlet, Customers can choose the method of heat in accordance with the conditions of local energy source and the method of dust removing in accordance with the conditions of raw material.
-------------------------------------------------------------------------------------------------
應用   Application
◎ 化學工業：氟化鈉(鉀)、堿性染料顏料、染料中間體、復合肥、甲醛硅酸、催化劑、硫酸劑、氨基酸、白炭黑等。
◎ 塑料樹脂：AB，ABS乳液、尿醛樹脂、酚醛樹脂、密膠(脲)甲醛樹脂、聚乙烯、聚氯乙烯等。
◎ 食品工業：富脂奶粉、胳朊、可可奶粉、代乳粉、豬血粉、蛋 清(黃)等。食物及植物：燕麥、雞汁、咖啡、速溶茶、調味香料肉、蛋白質、大豆、花生蛋白質、水解物等。糖類：玉米漿、玉米淀粉、葡萄糖、果膠、麥芽糖、山梨酸鉀等。
◎ 陶瓷、氧化鋁、瓷磚材料、氧化鎂、滑石粉等。
 
◎  Chemical Industry: Sodium fluoride(potassium), alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formic silicic acid, catalyst, sulphuric acid agent, amino acid, white carbon and so on.
◎  Plastics and resin: AB, ABS emulsion, uric acid resin, phenolic aldehyde resin, urea-formaldehyde resin, formaldehyde resin, polythene, polychloroprene and etc.
◎  Food Industry:Fatty milk powder, protein, cocoa milk powder, substitute milk powder, egg white(yolk), food and plant, oats, chicken juice, coffee, instant dissoluble tea, seasoning meat, protein, soybean, peanut protein, hydrolysate and so forth.

典型用戶：
                 蘇州永達化工有限公司                     西安惠豐藥業                             大慶沃太斯化工有限公司
                 河南天方藥業有限公司                     山東大禹制藥有限公司             山東中亞有限公司
                 浙江天草生物制品有限公司                                                    
技術參數   Technical parameters
尺寸Size    A       B        C       D      E1     E2      F       G       H      I
LPG-25   1290   3410  4260  1800  1200  1200  1000  1700  1300  1550
LPG-50   1730   4245  5100  2133  1640  1640  1250  1750  1800  1600
LPG-100  2500  5300  6000  2560  2100  2100  1750  1930  2600  1780
LPG-150  2800  6000  7000  2860  2180  2180  1970  2080  3050  1960
LPG-200  2800  6600  7300  3200  2300  2300  2210  2250  3050  2100
LPG-300  2800  8000  8700  3700  2800  2800  2520  2400  3050  2250