粉碎程度：
粗粉碎單位能耗：
·產量：
.裝機功率（kw）：
3KW成品細度：
< 0.25-20mm入料粒度（mm）：
< 170 x 220 mm看了切割式研磨儀的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The
Cutting Mill SM 400 XL is ideally suited for pre-cutting of large
sample pieces but, depending on the application, may also achieve the
required fineness in one step.
The high torque of the new 3
kW drive with flywheel mass allows for an exceptionally effective
preliminary size reduction of heterogeneous mixtures, such as waste or
electronic components.
The cutting mill is used successfully for a
great variety of materials. The sample is only moderately warmed up
during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.
Due to the large open surface of the 240 mm x 240 mm bottom sieve, it
is possible to grind large sample quantities and to increase the
throughput.
When operated with the optional cyclone-suction-combination,
the SM 400 XL is also suitable for grinding light sample materials. In
combination with the wide choice of bottom sieves, hoppers and
collecting vessels, the mill can be easily adapted to varying
application requirements.
動物飼料, 原料混合劑, 塑料, 塑料玩具, 廢料, 木頭, 樹脂, 植物原料, 橡膠, 燃料廢料, 瓶胚, 電子元件, 電纜, 皮革, 稻草, 箔, 紙張, 紙板, 紡織品, 聚合物, 藥品, 褐煤, 進樣小球, 鋁爐渣, 非鐵金屬, 食物, 香料, 骨頭, ...
powerful size reduction thanks to 3 kW drive
**的切割效果
accepts large feed sizes up to 170 mm x 220 mm
quick and easy cleaning due to fold-back hopper, smooth surfaces
defined final fineness due to bottom sieves with aperture sizes from 0.50 - 20 mm
| 應用 | 切割粉碎 |
| 應用領域 | 農業, 化學 / 合成材料, 醫藥品, 工程/電子, 環境 / 資源回收利用, 生物, 食物 |
| 樣品特征 | 軟性的, 中硬性, 硬的, 彈性的, 含纖維的 |
| 粉碎原理： | 剪切力 |
| **進樣尺寸 | < 170 x 220 mm |
| *終出料粒度 * | 0.5 - 20 mm |
| 粉碎腔容積 | ~7,45L |
| 網頻50赫茲（60赫茲）下的轉速 | 280轉/分鐘 |
| 旋翼圓周線速度 | 2,25 m/s |
| 轉刀直徑 | 152 mm |
| 轉刀類型 | parallel section rotor |
| 進料漏斗 | 普通漏斗, 長型漏斗 |
| 研磨套件材料： | 硬質剛, 碳化鎢 |
| 篩網尺寸： | trapezoid holes 0.50 / 1.00 / 2.00 mm round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm |
| 收集系統/容量 | collecting receptacle 5 l optional: cyclone-suction combination |
| 驅動 | 三相電機 |
| 驅動功率 | 3 kW with flywheel mass |
| 電源數據： | 不同電壓 |
| 電源接頭： | 三相 |
| 制動系統 | - |
| 防護類型 | IP 54 |
| 機體尺寸（寬x高x縱深） | 695 x 1399 x 719 mm |
| 凈重 | ~ 180 kg |
| 標準 | CE |
Please note:
受樣品材料性質和儀器配置/設定的影響
Size reduction in the Cutting Mill SM 400 XL takes place by cutting
and shearing forces. The sample hits the rotor and is comminuted between
the blades and the stationary cutting bars inserted in the housing.
Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements
根據技術改造和誤差調整
powerful size reduction thanks to 3 kW drive
最佳的切割效果
accepts large feed sizes up to 170 mm x 220 mm
quick and easy cleaning due to fold-back hopper, smooth surfaces
defined final fineness due to bottom sieves with aperture sizes from 0.50 - 20 mm
切割式研磨儀的工作原理介紹？切割式研磨儀的使用方法？切割式研磨儀多少錢一臺？切割式研磨儀使用的注意事項切割式研磨儀的說明書有嗎？切割式研磨儀的操作規程有嗎？切割式研磨儀的報價含票含運費嗎？切割式研磨儀有現貨嗎？切割式研磨儀包安裝嗎？
手機版：
工商已核實
