古诗大全300首小学,一杆大枪草一家三娘的故事,男人的坤坤升到女人的坤坤,国产处破苞无码精品网站下载

        隨著美國麥克儀器的市場份額的逐步壯大，美國麥克儀器已經成為行業科學研究必備儀器，日前英國哈德斯菲爾德大學教授發表了一篇題為“用于脂化生物柴油合成中游離脂肪酸的超高交聯聚苯乙烯磺酸催化劑 ”學術文章，已經被Applied Catalysis B: Environmental（115– 116 (2012) 261– 268）收錄，在該項研究中，美國麥克儀器ASAP 2020與DVS Advantage儀器成為表征催化劑最強有力的工具，為其研究提供了最具可信度的分析結果。以下列舉該文章的摘要以及鏈接供參考：
鏈接：
標題：Hypercrosslinked polystyrene sulphonic acid catalysts for the esterification of free fatty acids in biodiesel synthesis

摘要：
                                                                                                                      
New sulphonic acid catalysts supported on hypercrosslinked polystyrene have been studied in the esterification of oleic acid with methanol and in the rearrangement of α-pinene to camphene and limonenes. The catalysts have been characterised in terms of specific surface areas and porosities, affinities for water and for cylcohexane vapours, and both concentrations and strengths of acid sites. They have been compared with conventional macroporous polystyrene sulphonic acids (Amberlysts 15 and 35) and SAC-13, a composite between Nafion and silica. The results show that the hypercrosslinked polystyrene sulphonic acids, despite exhibiting relatively low concentrations of acid sites and acid site strengths below those of Amberlysts 15 and 35, are very much more catalytically active than conventional resins in reactions such as the esterification in which high acid site strengths are not required. It is thought that this is due to the highly accessible acid sites throughout the catalyst particles. Reusability studies are reported and it appears that the temperature at which the catalyst is used is important in controlling and minimising catalyst deactivation.

        美國麥克儀器公司是世界上第一家將自動表面積分析儀、壓汞儀以及沉降式粒度分析儀投放市場的公司。公司主營產品為研究級全自動比表面積與孔隙度分析儀、多站比表面積與孔隙度分析儀、快速比表面積與孔隙度分析儀、流動氣體法比表面分析儀、程序升溫化學吸附儀、化學吸附儀、壓汞儀、高壓吸附氣體吸附儀、蒸汽吸附儀、密度測量、顆粒技術和顆粒形態分析儀等各種材料表征儀器。

        美國麥克儀器產品在1979年進入中國市場，成為中美建交后最早進入中國市場的分析儀器。在為中國用戶服務30多年后，于2011年3月在上海成立了麥克默瑞提克（上海）儀器有限公司，專業為中國市場提供美國麥克儀器公司的產品。公司總部設在上海，并在北京、廣州、西安分別設有辦公室，并設有應用實驗室提供各類儀器的演示與操作培訓并提供對外做樣服務，為廣大用戶提供完整的實驗室解決方案與疑難樣品的分析。